How to program your garage door remote and keypad (Liftmaster, Chamberlain and other manufacturers).
To program your remote:
1. Press & release the “learn or smart” button on the back of your garage door opener. The learn indicator light will glow steadily for 30 seconds.
2. WITHIN 30 seconds, press & hold the button on your hand-held remote.
3. Release the button when the motor unit light blinks. It has “learned” the code. If the light bulbs are not installed 2 clicks will be heard.
To program your keypad:
1. Press & release the “learn” button on your garage door opener. The learn indicator light will glow steadily for 30 seconds.
2. WITHIN 30 seconds, enter a four digit code of your choice on the keyless entry. Then press & hold the ENTER button.
3. Release the button when the garage door opener lights blink. If no light bulbs are installed 2 clicks will be heard. Your code has been accepted.
DISCLAIMER
Mount Garage Doors Inc accepts no liability for the content of these pages, or for the consequences of any actions taken on the basis of the information provided.
If in doubt, please call (410) 549-2668 or 1-877-683-6677
=
Mount Garage Doors, Inc.
Westminster, MD 21157.
Tel: (410) 549-2668
Fax: (410) 549-4229
www.MountGarageDoors.com
Serving Carroll, Frederick, Howard and Baltimore Counties.
Commercial – Residential – Gate Openers – Service & Repair
3 Year Labor Warranties
MHIC #51659
